今天我们来介绍利用对抗生成网络（GAN）对低分辨率图像进行重构的介绍。再开始今天的任务之前，给大家强调一下，我们需要使用1.x.x版本的tensorflow和tensorlayer，我是用的是3.6版本的python，3.4.1.15版本的opencv以及1.8.0版本的tensorflow和tensorlayer。另外还有其他的一些模块需要安装，直接按照错误提示安装即可。
任务总览
分辨率在图片中的直接反应就是图像的大小，分辨率越高，图像的初始大小越大。如果将不同分辨率的图像放缩到同样的大小，分辨率低的图像会更模糊。超分辨率重构就是将分辨率低的图片重构成清晰的高分辨率图像：
所需要用到的网络结构图为：
数据加载与配置
这个部分对应着生成网络和判别网络的input部分的初始化。
首先需要大家下载srgan任务，打开config文件，我们主要的参数都将在这个文件中进行修改：
from easydict import EasyDict as edict
import json
config = edict()
config.TRAIN = edict()
## Adam
# batch设置过大有可能会引发内存不足的报错
config.TRAIN.batch_size = 4 # 可以适当调整
config.TRAIN.lr_init = 1e-4
config.TRAIN.beta1 = 0.9
## 初始化生成器
config.TRAIN.n_epoch_init = 100
## 判别器学习 (SRGAN)
config.TRAIN.n_epoch = 2000
config.TRAIN.lr_decay = 0.1
config.TRAIN.decay_every = int(config.TRAIN.n_epoch / 2)
# 训练集路径指定
config.TRAIN.hr_img_path = 'E:\srgan\srdata\srdata\DIV2K_train_HR'
config.TRAIN.lr_img_path = 'E:\srgan\srdata\srdata\DIV2K_train_LR_bicubic\X4'
config.VALID = edict()
# 测试集路径制定
config.VALID.hr_img_path = 'E:\srgan\srdata\srdata\DIV2K_valid_HR'
config.VALID.lr_img_path = 'E:\srgan\srdata\srdata\DIV2K_valid_LR_bicubic\X4'
def log_config(filename, cfg):
with open(filename, 'w') as f:
f.write("================================================\n")
f.write(json.dumps(cfg, indent=4))
f.write("\n================================================\n")
这里改好之后，我们需要对一些main.py文件里的函数进行一些设置，比如传递进batch_size，学习率，epoch等，同时要指定好生成的图像以及模型等文件的存储位置，之后把再图像读取进来：
import os
import time
import pickle, random
import numpy as np
import logging, scipy
import tensorflow as tf
import tensorlayer as tl
from model import SRGAN_g, SRGAN_d, Vgg19_simple_api
from utils import *
from config import config, log_config
## Adam
batch_size = config.TRAIN.batch_size # 4
lr_init = config.TRAIN.lr_init # 1e-4
beta1 = config.TRAIN.beta1 # 0.9
## 初始化生成器
n_epoch_init = config.TRAIN.n_epoch_init # 100
## 判别器学习(SRGAN)
n_epoch = config.TRAIN.n_epoch # 2000
lr_decay = config.TRAIN.lr_decay # 0.1
decay_every = config.TRAIN.decay_every # 1000
ni = int(np.sqrt(batch_size))
def train():
## 创建文件夹保存结果图像和训练模型
save_dir_ginit = "samples/{}_ginit".format(tl.global_flag['mode'])
save_dir_gan = "samples/{}_gan".format(tl.global_flag['mode'])
tl.files.exists_or_mkdir(save_dir_ginit)
tl.files.exists_or_mkdir(save_dir_gan)
checkpoint_dir = "checkpoint" # checkpoint_resize_conv
tl.files.exists_or_mkdir(checkpoint_dir)
# load_file_list可以把所有的文件都加载进来
# path指定文件夹的路径
# regx='.*.png'代表读取所有.png的文件
train_hr_img_list = sorted(tl.files.load_file_list(path=config.TRAIN.hr_img_path, regx='.*.png', printable=False))[:800] # 如果出现memory error可以这样操作减少一次读取的数据量
train_lr_img_list = sorted(tl.files.load_file_list(path=config.TRAIN.lr_img_path, regx='.*.png', printable=False)) # 不加切片读取也是可以的，但一定要注意传入的低分高分图像数量要匹配
# 读取全部的内容花费时间较长
valid_hr_img_list = sorted(tl.files.load_file_list(path=config.VALID.hr_img_path, regx='.*.png', printable=False))
valid_lr_img_list = sorted(tl.files.load_file_list(path=config.VALID.lr_img_path, regx='.*.png', printable=False))
## 如果计算机内存够大，可以加在全部内容
# n_threads可以当成多线程，这里意思是每8张一组一并处理
train_hr_imgs = tl.vis.read_images(train_hr_img_list, path=config.TRAIN.hr_img_path, n_threads=8)
## 设置生成器、判别器和特征提取模块的输入内容
# 制作生成器和判别器的输入数据
t_image = tf.placeholder('float32', [batch_size, 96, 96, 3], name='t_image_input_to_SRGAN_generator')
# 判别器接收的原始高分辨图像
t_target_image = tf.placeholder('float32', [batch_size, 384, 384, 3], name='t_target_image')
# vgg特征提取模块初始化设置
t_target_image_224 = tf.image.resize_images(
t_target_image, size=[224, 224], method=0, # 剪切成对应的大小
align_corners=False)
t_predict_image_224 = tf.image.resize_images(net_g.outputs, size=[224, 224], method=0, align_corners=False)
这样一来，我们就完成了数据的加载和小部分参数的配置。接下来我们就需要在main.py文件中继续调整生成模块、判别模块、特征提取、损失函数设置和测试模块。
模型设置
以上我们已经完成了读取文件夹内的图像内容的任务，接下来就需要用生成器和判别器分别处理各自的输入内容了。源码中生成器和判别器的具体操作是在model.py文件中执行的，main.py只是负责调用这个模块。因此我们先讲解model中的内容。首先说生成器：
生成器所需要用到的卷积和残差模块，以及对应结果加和处理都需要在这里进行设置：
import tensorflow as tf
import tensorlayer as tl
from tensorlayer.layers import *
import time
import os
# 生成网络
def SRGAN_g(t_image, is_train=False, reuse=False):
w_init = tf.random_normal_initializer(stddev=0.02)
b_init = None # tf.constant_initializer(value=0.0)
g_init = tf.random_normal_initializer(1., 0.02)
with tf.variable_scope("SRGAN_g", reuse=reuse) as vs:
# 输入层，内容+名字
n = InputLayer(t_image, name='in')
# 进行卷积（初始化）
n = Conv2d(n, 64, (3, 3), (1, 1), act=tf.nn.relu, padding='SAME', W_init=w_init, name='n64s1/c')
temp = n
# 设置16个残差模块
for i in range(16):
nn = Conv2d(n, 64, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='n64s1/c1/%s' % i)
nn = BatchNormLayer(nn, act=tf.nn.relu, is_train=is_train, gamma_init=g_init, name='n64s1/b1/%s' % i)
nn = Conv2d(nn, 64, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='n64s1/c2/%s' % i)
nn = BatchNormLayer(nn, is_train=is_train, gamma_init=g_init, name='n64s1/b2/%s' % i)
nn = ElementwiseLayer([n, nn], tf.add, name='b_residual_add/%s' % i)
n = nn
# 残差信息整合
# 对应网络示意图中的skip connection步骤
n = Conv2d(n, 64, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='n64s1/c/m')
n = BatchNormLayer(n, is_train=is_train, gamma_init=g_init, name='n64s1/b/m')
# 把最开始的结果（temp）加到当前的结果当中
n = ElementwiseLayer([n, temp], tf.add, name='add3')
# 重构出图
n = Conv2d(n, 256, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, name='n256s1/1')
n = SubpixelConv2d(n, scale=2, n_out_channel=None, act=tf.nn.relu, name='pixelshufflerx2/1')
n = Conv2d(n, 256, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, name='n256s1/2')
n = SubpixelConv2d(n, scale=2, n_out_channel=None, act=tf.nn.relu, name='pixelshufflerx2/2')
n = Conv2d(n, 3, (1, 1), (1, 1), act=tf.nn.tanh, padding='SAME', W_init=w_init, name='out')
return n
对于判别器，也要在model中进行设置：
def SRGAN_d(input_images, is_train=True, reuse=False): # reuse指定为True意味着输入的图像是从原始数据集中取到的，
# False意味着图像是生成器生成的
# 参数的初始化指定
w_init = tf.random_normal_initializer(stddev=0.02)
b_init = None # tf.constant_initializer(value=0.0)
gamma_init = tf.random_normal_initializer(1., 0.02)
df_dim = 64
lrelu = lambda x: tl.act.lrelu(x, 0.2)
# 基础的判别网络
with tf.variable_scope("SRGAN_d", reuse=reuse):
tl.layers.set_name_reuse(reuse)
net_in = InputLayer(input_images, name='input/images')
net_h0 = Conv2d(net_in, df_dim, (4, 4), (2, 2), act=lrelu, padding='SAME', W_init=w_init, name='h0/c')
net_h1 = Conv2d(net_h0, df_dim * 2, (4, 4), (2, 2), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h1/c')
net_h1 = BatchNormLayer(net_h1, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h1/bn')
net_h2 = Conv2d(net_h1, df_dim * 4, (4, 4), (2, 2), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h2/c')
net_h2 = BatchNormLayer(net_h2, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h2/bn')
net_h3 = Conv2d(net_h2, df_dim * 8, (4, 4), (2, 2), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h3/c')
net_h3 = BatchNormLayer(net_h3, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h3/bn')
net_h4 = Conv2d(net_h3, df_dim * 16, (4, 4), (2, 2), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h4/c')
net_h4 = BatchNormLayer(net_h4, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h4/bn')
net_h5 = Conv2d(net_h4, df_dim * 32, (4, 4), (2, 2), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h5/c')
net_h5 = BatchNormLayer(net_h5, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h5/bn')
net_h6 = Conv2d(net_h5, df_dim * 16, (1, 1), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h6/c')
net_h6 = BatchNormLayer(net_h6, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='h6/bn')
net_h7 = Conv2d(net_h6, df_dim * 8, (1, 1), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='h7/c')
net_h7 = BatchNormLayer(net_h7, is_train=is_train, gamma_init=gamma_init, name='h7/bn')
net = Conv2d(net_h7, df_dim * 2, (1, 1), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='res/c')
net = BatchNormLayer(net, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='res/bn')
net = Conv2d(net, df_dim * 2, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='res/c2')
net = BatchNormLayer(net, act=lrelu, is_train=is_train, gamma_init=gamma_init, name='res/bn2')
net = Conv2d(net, df_dim * 8, (3, 3), (1, 1), act=None, padding='SAME', W_init=w_init, b_init=b_init, name='res/c3')
net = BatchNormLayer(net, is_train=is_train, gamma_init=gamma_init, name='res/bn3')
net_h8 = ElementwiseLayer([net_h7, net], combine_fn=tf.add, name='res/add')
net_h8.outputs = tl.act.lrelu(net_h8.outputs, 0.2)
net_ho = FlattenLayer(net_h8, name='ho/flatten') # 池化
net_ho = DenseLayer(net_ho, n_units=1, act=tf.identity, W_init=w_init, name='ho/dense')
logits = net_ho.outputs
net_ho.outputs = tf.nn.sigmoid(net_ho.outputs)
return net_ho, logits
如果上述内容中有不懂的参数，可以查询文档。
还有，我们需要把特征提取模块（VGG）加进来，这个模块具体的作用会在损失函数里具体介绍，我们这里只需要知道vgg会帮我们提取生成图像和原始高清图像做特征比对，我们把它也写到model里：
def Vgg19_simple_api(rgb, reuse):
# 减均值
VGG_MEAN = [103.939, 116.779, 123.68]
with tf.variable_scope("VGG19", reuse=reuse) as vs:
start_time = time.time()
print("build model started")
rgb_scaled = rgb * 255.0
# Convert RGB to BGR
red, green, blue = tf.split(rgb_scaled, 3, 3)
assert red.get_shape().as_list()[1:] == [224, 224, 1]
assert green.get_shape().as_list()[1:] == [224, 224, 1]
assert blue.get_shape().as_list()[1:] == [224, 224, 1]
bgr = tf.concat(
[
blue - VGG_MEAN[0],
green - VGG_MEAN[1],
red - VGG_MEAN[2],
], axis=3)
assert bgr.get_shape().as_list()[1:] == [224, 224, 3] #
""" input layer """
net_in = InputLayer(bgr, name='input')
# 每卷积一轮特征图的大小缩小为原来的1/4（长宽各缩小一半）
""" conv1 """
network = Conv2d(net_in, n_filter=64, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv1_1')
network = Conv2d(network, n_filter=64, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv1_2')
network = MaxPool2d(network, filter_size=(2, 2), strides=(2, 2), padding='SAME', name='pool1')
""" conv2 """
network = Conv2d(network, n_filter=128, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv2_1')
network = Conv2d(network, n_filter=128, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv2_2')
network = MaxPool2d(network, filter_size=(2, 2), strides=(2, 2), padding='SAME', name='pool2')
""" conv3 """
network = Conv2d(network, n_filter=256, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv3_1')
network = Conv2d(network, n_filter=256, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv3_2')
network = Conv2d(network, n_filter=256, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv3_3')
network = Conv2d(network, n_filter=256, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv3_4')
network = MaxPool2d(network, filter_size=(2, 2), strides=(2, 2), padding='SAME', name='pool3')
""" conv4 """
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv4_1')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv4_2')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv4_3')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv4_4')
network = MaxPool2d(network, filter_size=(2, 2), strides=(2, 2), padding='SAME', name='pool4') # (batch_size, 14, 14, 512)
conv = network
""" conv5 """
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv5_1')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv5_2')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv5_3')
network = Conv2d(network, n_filter=512, filter_size=(3, 3), strides=(1, 1), act=tf.nn.relu, padding='SAME', name='conv5_4')
network = MaxPool2d(network, filter_size=(2, 2), strides=(2, 2), padding='SAME', name='pool5') # (batch_size, 7, 7, 512)
""" fc 6~8 """
network = FlattenLayer(network, name='flatten')
network = DenseLayer(network, n_units=4096, act=tf.nn.relu, name='fc6')
network = DenseLayer(network, n_units=4096, act=tf.nn.relu, name='fc7')
network = DenseLayer(network, n_units=1000, act=tf.identity, name='fc8')
print("build model finished: %fs" % (time.time() - start_time))
return network, conv
这样一来，训练所需要的模型我们就设置好了，跑代码的时候就可以直接调用了。
生成、判别、特征提取模块调用
GAN网络是一个由生成器和判别器互相耦合网络，生成器的生成并不直接受训练集的约束，因此生成器输入的内容与训练集输入不同。在上一讲中，由于任务简单，我们直接用随机噪声作为生成器的输入，但今天，为了适应较为复杂的超分辨率任务，srgan网络设计了用低分辨率图像作为生成器的初始化输入。下面我们写代码调用模块完成生成、判别和特征提取（继续补到main.py后面）：
# 数据传入网络
net_g = SRGAN_g(t_image, is_train=True, reuse=False)
net_d, logits_real = SRGAN_d(t_target_image, is_train=True, reuse=False) # 让网络判为真
# reuse设置为真可以帮我们自动重新构建网络
_, logits_fake = SRGAN_d(net_g.outputs, is_train=True, reuse=True) # 让网络判为假
## 可以用以下方式查看网络的各种参数、层数等
# net_g.print_params(False)
# net_g.print_layers()
# net_d.print_params(False)
# net_d.print_layers()
# reuse和之前一样，表示图像是生成结果（False）或数据集中取出的高清图片（True）
net_vgg, vgg_target_emb = Vgg19_simple_api((t_target_image_224 + 1) / 2, reuse=False)
_, vgg_predict_emb = Vgg19_simple_api((t_predict_image_224 + 1) / 2, reuse=True)
损失函数与训练
损失函数是可以对生成结果产生关键影响的部分，如何设计好便是关键。这里我们选择用以下三个方面作为损失函数的考量因素：
- MSEloss均方误差损失，用生成图像与训练集中对应的高分辨率图像进行逐个像素点比较，计算对应的损失；
- VGG特征提取模块，将生成模块与原高清图像进行相同的卷积提取特征，然后将提取到的特征进行对比，计算对应损失；
- GANloss，这是经典的损失，用于衡量生成结果经过判别器所产生的损失。
我们先知道需要用到的这些损失即可，它们的作用会在注释中给大家介绍。下面的代码仍是main.py中的内容：
# 判别器loss，传递进数据时给数据打上标号
# tf.ones_like(logits_real)生成了与logits_real等大的全1矩阵代表是真实取出的内容
d_loss1 = tl.cost.sigmoid_cross_entropy(logits_real, tf.ones_like(logits_real), name='d1')
# tf.ones_like(logits_fake)生成了与logits_fake等大的全0矩阵代表是生成器生成的内容
d_loss2 = tl.cost.sigmoid_cross_entropy(logits_fake, tf.zeros_like(logits_fake), name='d2')
d_loss = d_loss1 + d_loss2
# 生成网络希望logits_fake和高分辨率原图更像
# logits_fake是判别器对生成图像的特征判别结果，我们将用它与和它等大的全1矩阵进行比较，得到损失值
g_gan_loss = 1e-3 * tl.cost.sigmoid_cross_entropy(logits_fake, tf.ones_like(logits_fake), name='g')
# 生成图像与真实高清图做逐帧比较
mse_loss = tl.cost.mean_squared_error(net_g.outputs, t_target_image, is_mean=True)
# 进行vgg特征图的比较
vgg_loss = 2e-6 * tl.cost.mean_squared_error(vgg_predict_emb.outputs, vgg_target_emb.outputs, is_mean=True)
g_loss = mse_loss + vgg_loss + g_gan_loss
g_vars = tl.layers.get_variables_with_name('SRGAN_g', True, True)
d_vars = tl.layers.get_variables_with_name('SRGAN_d', True, True)
# 初始化学习率
with tf.variable_scope('learning_rate'):
lr_v = tf.Variable(lr_init, trainable=False)
# 预训练
g_optim_init = tf.train.AdamOptimizer(lr_v, beta1=beta1).minimize(mse_loss, var_list=g_vars)
## SRGAN
g_optim = tf.train.AdamOptimizer(lr_v, beta1=beta1).minimize(g_loss, var_list=g_vars)
d_optim = tf.train.AdamOptimizer(lr_v, beta1=beta1).minimize(d_loss, var_list=d_vars)
##================重建模型====================
sess = tf.Session(config=tf.ConfigProto(allow_soft_placement=True, log_device_placement=False))
tl.layers.initialize_global_variables(sess)
# 查看checkpoint中是否有训练好的模型，有则加载，没有模型从0开始训练
if tl.files.load_and_assign_npz(sess=sess, name=checkpoint_dir + '/g_{}.npz'.format(tl.global_flag['mode']), network=net_g) is False:
tl.files.load_and_assign_npz(sess=sess, name=checkpoint_dir + '/g_{}_init.npz'.format(tl.global_flag['mode']), network=net_g)
tl.files.load_and_assign_npz(sess=sess, name=checkpoint_dir + '/d_{}.npz'.format(tl.global_flag['mode']), network=net_d)
##===============加载特征提取模型===============
vgg19_npy_path = "vgg19.npy"
if not os.path.isfile(vgg19_npy_path):
print("Please download vgg19.npz")
exit()
npz = np.load(vgg19_npy_path, encoding='latin1').item()
params = []
for val in sorted(npz.items()): # 提取vgg模块中的参数
W = np.asarray(val[1][0])
b = np.asarray(val[1][1])
print(" Loading %s: %s, %s" % (val[0], W.shape, b.shape))
params.extend([W, b])
tl.files.assign_params(sess, params, net_vgg)
print ('ok')
## 开始训练
## 在训练过程中使用训练集的第一个batch_size进行快速测试
sample_imgs = train_hr_imgs[0:batch_size]
sample_imgs_384 = tl.prepro.threading_data(sample_imgs, fn=crop_sub_imgs_fn, is_random=False)
print('sample HR sub-image:', sample_imgs_384.shape, sample_imgs_384.min(), sample_imgs_384.max())
sample_imgs_96 = tl.prepro.threading_data(sample_imgs_384, fn=downsample_fn)
print('sample LR sub-image:', sample_imgs_96.shape, sample_imgs_96.min(), sample_imgs_96.max())
tl.vis.save_images(sample_imgs_96, [ni, ni], save_dir_ginit + '/_train_sample_96.png')
tl.vis.save_images(sample_imgs_384, [ni, ni], save_dir_ginit + '/_train_sample_384.png')
tl.vis.save_images(sample_imgs_96, [ni, ni], save_dir_gan + '/_train_sample_96.png')
tl.vis.save_images(sample_imgs_384, [ni, ni], save_dir_gan + '/_train_sample_384.png')
## 固定学习率学习
sess.run(tf.assign(lr_v, lr_init))
print(" ** fixed learning rate: %f (for init G)" % lr_init)
for epoch in range(0, n_epoch_init + 1):
epoch_time = time.time()
total_mse_loss, n_iter = 0, 0
for idx in range(0, len(train_hr_imgs), batch_size):
step_time = time.time()
b_imgs_384 = tl.prepro.threading_data(train_hr_imgs[idx:idx + batch_size], fn=crop_sub_imgs_fn, is_random=True)
b_imgs_96 = tl.prepro.threading_data(b_imgs_384, fn=downsample_fn)
## 更新生成器
errM, _ = sess.run([mse_loss, g_optim_init], {
t_image: b_imgs_96, t_target_image: b_imgs_384})
print("Epoch [%2d/%2d] %4d time: %4.4fs, mse: %.8f " % (epoch, n_epoch_init, n_iter, time.time() - step_time, errM))
total_mse_loss += errM
n_iter += 1
log = "[*] Epoch: [%2d/%2d] time: %4.4fs, mse: %.8f" % (epoch, n_epoch_init, time.time() - epoch_time, total_mse_loss / n_iter)
print(log)
## 快速测试
if (epoch != 0) and (epoch % 10 == 0):
out = sess.run(net_g_test.outputs, {
t_image: sample_imgs_96})
print("[*] save images")
tl.vis.save_images(out, [ni, ni], save_dir_ginit + '/train_%d.png' % epoch)
## 每十个epoch保存一次模型
if (epoch != 0) and (epoch % 10 == 0):
tl.files.save_npz(net_g.all_params, name=checkpoint_dir + '/g_{}_init.npz'.format(tl.global_flag['mode']), sess=sess)
###========================= train GAN (SRGAN) =========================###
for epoch in range(0, n_epoch + 1):
## 更新学习率
if epoch != 0 and (epoch % decay_every == 0):
new_lr_decay = lr_decay**(epoch // decay_every)
sess.run(tf.assign(lr_v, lr_init * new_lr_decay))
log = " ** new learning rate: %f (for GAN)" % (lr_init * new_lr_decay)
print(log)
elif epoch == 0:
sess.run(tf.assign(lr_v, lr_init))
log = " ** init lr: %f decay_every_init: %d, lr_decay: %f (for GAN)" % (lr_init, decay_every, lr_decay)
print(log)
epoch_time = time.time()
total_d_loss, total_g_loss, n_iter = 0, 0, 0
for idx in range(0, len(train_hr_imgs), batch_size):
step_time = time.time()
b_imgs_384 = tl.prepro.threading_data(train_hr_imgs[idx:idx + batch_size], fn=crop_sub_imgs_fn, is_random=True)
b_imgs_96 = tl.prepro.threading_data(b_imgs_384, fn=downsample_fn)
## 更新判别器
errD, _ = sess.run([d_loss, d_optim], {
t_image: b_imgs_96, t_target_image: b_imgs_384})
## 更新生成器
errG, errM, errV, errA, _ = sess.run([g_loss, mse_loss, vgg_loss, g_gan_loss, g_optim], {
t_image: b_imgs_96, t_target_image: b_imgs_384})
print("Epoch [%2d/%2d] %4d time: %4.4fs, d_loss: %.8f g_loss: %.8f (mse: %.6f vgg: %.6f adv: %.6f)" %
(epoch, n_epoch, n_iter, time.time() - step_time, errD, errG, errM, errV, errA))
total_d_loss += errD
total_g_loss += errG
n_iter += 1
log = "[*] Epoch: [%2d/%2d] time: %4.4fs, d_loss: %.8f g_loss: %.8f" % (epoch, n_epoch, time.time() - epoch_time, total_d_loss / n_iter,
total_g_loss / n_iter)
print(log)
## quick evaluation on train set
if (epoch != 0) and (epoch % 10 == 0):
out = sess.run(net_g_test.outputs, {
t_image: sample_imgs_96}) #; print('gen sub-image:', out.shape, out.min(), out.max())
print("[*] save images")
tl.vis.save_images(out, [ni, ni], save_dir_gan + '/train_%d.png' % epoch)
## 保存模型
if (epoch != 0) and (epoch % 10 == 0):
tl.files.save_npz(net_g.all_params, name=checkpoint_dir + '/g_{}.npz'.format(tl.global_flag['mode']), sess=sess)
tl.files.save_npz(net_d.all_params, name=checkpoint_dir + '/d_{}.npz'.format(tl.global_flag['mode']), sess=sess)
def evaluate():
## create folders to save result images
save_dir = "samples/{}".format(tl.global_flag['mode'])
tl.files.exists_or_mkdir(save_dir)
checkpoint_dir = "checkpoint"
valid_hr_img_list = sorted(tl.files.load_file_list(path=config.VALID.hr_img_path, regx='.*.png', printable=False))
valid_lr_img_list = sorted(tl.files.load_file_list(path=config.VALID.lr_img_path, regx='.*.png', printable=False))
valid_lr_imgs = tl.vis.read_images(valid_lr_img_list, path=config.VALID.lr_img_path, n_threads=8)
valid_hr_imgs = tl.vis.read_images(valid_hr_img_list, path=config.VALID.hr_img_path, n_threads=8)
测试
测试部分主要是检查生成器跑出的模型（保存在checkpoint里的g_srgan.npz文件）是否实用，而判别器的学习结果我们并没有进行保存。想要进行测试，就需要传入低分辨率图像，让图像经过模型生成高分辨率图像，在与真实的高分辨率图像进行对比。先来看看代码，这部分代码依然是main.py的后续部分：
imid = 9 # 输入待超分的低分辨率图像序号
valid_lr_img = valid_lr_imgs[imid]
valid_hr_img = valid_hr_imgs[imid]
valid_lr_img = (valid_lr_img / 127.5) - 1
size = valid_lr_img.shape
t_image = tf.placeholder('float32', [1, None, None, 3], name='input_image')
net_g = SRGAN_g(t_image, is_train=False, reuse=False)
###========================== RESTORE G =============================###
sess = tf.Session(config=tf.ConfigProto(allow_soft_placement=True, log_device_placement=False))
tl.layers.initialize_global_variables(sess)
tl.files.load_and_assign_npz(sess=sess, name=checkpoint_dir + '/g_srgan.npz', network=net_g)
###======================= EVALUATION =============================###
start_time = time.time()
out = sess.run(net_g.outputs, {
t_image: [valid_lr_img]})
print("took: %4.4fs" % (time.time() - start_time))
print("LR size: %s / generated HR size: %s" % (size, out.shape))
print("[*] save images")
tl.vis.save_image(out[0], save_dir + '/valid_gen.png')
tl.vis.save_image(valid_lr_img, save_dir + '/valid_lr.png')
tl.vis.save_image(valid_hr_img, save_dir + '/valid_hr.png')
out_bicu = scipy.misc.imresize(valid_lr_img, [size[0] * 4, size[1] * 4], interp='bicubic', mode=None)
tl.vis.save_image(out_bicu, save_dir + '/valid_bicubic.png')
if __name__ == '__main__':
import argparse
parser = argparse.ArgumentParser()
parser.add_argument('--mode', type=str, default='evaluate', help='srgan, evaluate')
# 这个参数可以选择srgan或evaluate
args = parser.parse_args()
tl.global_flag['mode'] = args.mode
if tl.global_flag['mode'] == 'srgan':
# 先训练后输出
train()
evaluate()
elif tl.global_flag['mode'] == 'evaluate':
evaluate()
else:
raise Exception("Unknow --mode")
这样我们就可以借助训练出的模型对图像进行超分了，运行的结果会给我们保存到evaluate文件夹中，我们可以来对比一下：
从左至右依次为原低分辨率图像、超分图像、原高分辨率图像。如果大家觉得结果对比不是很明显的话，可以自己运行一下试试看啦~
下面给大家贴一些训练时的部分pycharm终端内容：
（这后面还有一个2000epoch的训练我忘记截了，真的很难难跑…都看到这里了确定不点个赞嘛）
今天的内容就到这里了，代码很多，但是我们需要修改的地方并不太多，希望对大家有所帮助。
转载：https://blog.csdn.net/weixin_54929649/article/details/127708958
查看评论