1.问题描述：
2.部分程序：
`timescale 1ns / 1ps
//
// Company:
// Engineer:
//
// Create Date: 02:59:07 06/05/2019
// Design Name:
// Module Name: MPPT_module
// Project Name:
// Target Devices:
// Tool versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//
module MPPT_module(
i_clk,
i_rst,
i_PV_current,
i_PV_voltage,
o_PV_power,
o_PV_max,
o_PV_current,
o_PV_voltage,
o_state
);
input i_clk;
input i_rst;
input signed[15:0]i_PV_current;
input signed[15:0]i_PV_voltage;
output signed[31:0]o_PV_power;
output signed[31:0]o_PV_max;
output signed[15:0]o_PV_current;
output signed[15:0]o_PV_voltage;
output [1:0]o_state;
//power
multi_core multi_core_u(
.a(i_PV_current), // input [15 : 0] a
.b(i_PV_voltage), // input [15 : 0] b
.p(o_PV_power) // output [31 : 0] p
);
reg signed[31:0]r_PV_k1;
reg signed[31:0]o_PV_max;
always @(posedge i_clk or posedge i_rst)
begin
if(i_rst)
begin
o_PV_max <= 32'd0;
r_PV_k1 <= 32'd0;
end
else begin
r_PV_k1 <= o_PV_power;
if(o_PV_power>o_PV_max)
o_PV_max <= o_PV_power;
else
o_PV_max <= o_PV_max;
end
end
wire signed[31:0]Uk;
wire signed[31:0]Pk;
assign Uk = i_PV_voltage;
assign Pk = o_PV_power;
reg signed[15:0]dU = 16'd1;
reg signed[15:0]dU0= 16'd1;
reg signed[31:0]Pk1;
reg signed[15:0]Uk1;
reg signed[15:0]Uref;
//自适应步长的产生
reg[19:0]cnt;
always @(posedge i_clk or posedge i_rst)
begin
if(i_rst)
begin
cnt <= 20'd0;
end
else begin
if(cnt>=20'd35000)
cnt <= 20'd35000;
else
cnt <= cnt+20'd1;
end
end
reg[1:0]o_state;
always @(posedge i_clk or posedge i_rst)
begin
if(i_rst)
begin
Pk1 <= 32'd0;
Uk1 <= 16'd0;
Uref <= 16'd0;
o_state <= 2'd0;
end
else begin
Pk1 <= Pk;
Uk1 <= Uk;
if(Pk>=Pk1 & Uk>Uk1)
begin
Uref <= Uref + {dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15:6]};
o_state <= 2'd0;
end
if(Pk>=Pk1 & Uk<=Uk1)
begin
Uref <= Uref - {dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15:6]};
o_state <= 2'd1;
end
if(Pk<Pk1 & Uk>Uk1)
begin
Uref <= Uref - {dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15:6]};
o_state <= 2'd2;
end
if(Pk<Pk1 & Uk<=Uk1)
begin
Uref <= Uref + {dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15],dU0[15:6]};
o_state <= 2'd3;
end
end
end
assign o_PV_voltage=Uref;
assign o_PV_current=dU0 ;
reg signed[31:0]Power_diffe;
reg signed[7:0] Current_diff;
always @(posedge i_clk or posedge i_rst)
begin
if(i_rst)
begin
dU <= 16'd1;
dU0 <= 16'd1;
Power_diffe <= 32'd0;
Current_diff <= 8'd0;
end
else begin
Power_diffe <= o_PV_max-r_PV_k1;
Current_diff <= i_PV_current[15:8];
if(cnt<20'd4000)
begin
if({Power_diffe[31-4:16-4],4'd0}>16'd10)
dU0<= {16'd16};
else
dU0<= {Power_diffe[31-4:16-4],4'd0};
end
else begin
dU0<= {Power_diffe[31-4:16-4],4'd0};
end
end
end
endmodule
3.仿真结论：
A-002-0067
转载：https://blog.csdn.net/ccsss22/article/details/114743042